LED Face Masks
Five production-ready models, from 120 to 504 LED chips across three to nine light modes. Silicone and hard-shell formats, rechargeable, foldable, and customizable on logo, colorway, packaging and mode selection.
Five models, one design language
All five share our electronics platform, which is why a specification change is a conversation with our engineering team rather than a wait on a third-party supplier.
3D LED Multi-Light Therapy Mask
Our flagship multi-light platform. 280 medical-grade LED chips at 630 / 850 / 465 / 530nm in a 1:1:1:1 ratio, nine selectable light modes, and a 2000mAh cell for over 100 minutes of continuous use. ABS shell with a soft silicone face seal.
3D LED Multi-Light Therapy Mask
The same nine-mode light engine as the RB-051 in an alternative shell geometry, so buyers can offer a second silhouette without re-qualifying the electronics platform. 280 chips, 2000mAh, over 100 minutes per charge.
LED Beauty Mask
The entry point in the face mask range. 120 LED chips covering 630 / 465 / 850nm in three selectable modes, PP and ABS construction, a 2000mAh cell and over 90 minutes of use. Positioned for mass retail and gifting programmes.
Magnetic Wireless LED Beauty Mask
280 LED chips and eight light modes in a magnetic wireless format. A 1000mAh cell charges in about 2.5 hours and runs for over 60 minutes; at 188.5g it is the lightest full-feature option in the range.
Red Light Neck & Décolleté Mask
A 504-chip collar covering the neck and upper chest, on a 4000mAh cell for over 100 minutes of continuous use. Usually ordered alongside a face mask so both run on one protocol; also available as the one-piece RB-069A + RB-065-02 combination.
Also in the LED range
Beyond the five face and neck masks above we tool nine further light-therapy formats, covering hair growth, sports recovery and full-body panels. Tooling is open on all of them, so a custom shell, wavelength mix or size is a normal order rather than an exception.
3D LED Multi-Light Therapy Mask
280 LED chips · 630 / 850 / 465 / 530nm · 9 modes · MOQ 500 pcs
LED Beauty Mask — clamp-on
280 LED chips · 8 modes · 144 g · MOQ 1,000 pcs
Red Light Neck Mask
280 LED chips · 2000mAh · 120 mW/cm² · MOQ 1,000 pcs
One-piece Face & Neck Mask
448 + 504 LED chips · 9 modes · silicone · MOQ 1,000 pcs
Red Light Therapy Hat
256 LED chips · 630 + 850nm · 70 mW/cm² · MOQ 1,000 pcs
Red Light Therapy Hat — fabric
216 LED chips · 2000mAh · 150+ min · MOQ 1,000 pcs
Sports Recovery Wearable
Red + near-infrared belt format · rechargeable · custom length on request
Full-body Care Panel
Higher-density panel for studio and clinical settings · built to order
Flagship model comparison
Specifications below are the current platform defaults. Custom wavelength mixtures and bead counts are available from 3,000 pcs.
| Model | LED Beads | Wavelengths | Modes | Battery | Shell | MOQ |
|---|---|---|---|---|---|---|
| RB-051 | 280 | 630 / 850 / 465 / 530nm | 9 | 100+ min | ABS + silicone | 500 |
| RB-071 | 280 | 630 / 850 / 465 / 530nm | 9 | 100+ min | ABS + silicone | 500 |
| RB-008 | 120 | 630 / 465 / 850nm | 3 | 90+ min | PP + ABS | 500 |
| RB-008J | 280 | 630 / 850 / 465 / 530nm | 8 | 60+ min | ABS + silicone | 1,000 |
| RB-065-02 | 504 | 630 / 850 / 465 / 530nm | 9 | 100+ min | Silicone | 500 |
Customizable on all five models
Every mask in this line accepts the same customization set. Nothing here requires new tooling unless you move to a custom housing.
- Logo printing on housing
- Pantone color matching
- Retail box and insert design
- Multilingual manual
- Mode enable / disable
- Strap and cable config
Choosing an LED mask model
Q: Which model should I start with?
RB-051 is the safest first order. It carries the widest mode set in the line, so one SKU covers most retail listings, and it sits at 500 pcs MOQ. Move to RB-008 if your channel needs a lower unit cost and three modes are enough, or to the RB-065-02 neck collar if you want a second SKU to raise order value alongside the face mask.
Q: Can I mix models in one order?
Yes. Different models can be combined to reach the MOQ and packed in mixed cartons. Mixed orders do not add lead time provided all artwork is approved at the same time.
Q: Do you supply a wavelength test report?
Yes. Every LED model ships with a third-party optical test report confirming actual output wavelength and irradiance. This is the document marketplace compliance teams ask for when a listing is challenged.
Q: What is the difference between silicone and hard shell?
Silicone folds flat, travels better and sits lower in packaging cost. Hard shell holds its shape, reads as a more substantial device and often supports a higher retail price. The LED platform and battery are the same, so the choice is positioning rather than performance.
Request LED mask pricing
Tell us the model, quantity and target market. We reply within one business day with pricing, lead time and a sampling plan.